Відео

Another nice vid! I like my Toro. It’s my go-to, for the trimmer/mowing season. I swap out attachments to knock down brush, edge or trim.. it does it all! My only complaint was the leaky grommet on my fuel tank, which has since been replaced. Zero issues since then.

Four years late to the party.. If it were me, I’d say keep it. I’ve started a little “side hustle” fixing free trimmers that aren’t running and considered no good, by some. Also, I just started diagnosis on a John Deere trimmer today. I can’t quote the specific model; however, from the looks of it, mine is even older than that one! (Ex. The intake cover is held on, by a single swing-arm clamp). I’ve never seen another JD trimmer, so I hope to get it running again. Nice video, btw. Gives me a direction for some other things to check.

What is good compression for an old weed eater

Is the app called kajiji

I see a perfect engine for a push mower, a set of 4 wheels ideal for a push mower, lotsa hardware to fix other mowers plus something for the scrap man. That’s what I did with the last three edgers I had, paid off nicely!

Find out what the problem is, repair if feasible then sell or donate. Either way, please do makae a video on this item!! 😁

Delete the channel

Hey bro what's up? Fix it up and sell it.

My Toro Recycler has a washout port, but my experience has been almost the same as yours. I've tried it, but IMO its not worth the time. I don't use it now. It amazes me how people can neglect their lawn, then expect a push mower to be able to mulch tall grass. I once saw a forum discussion where someone was complaining that their mower wasn't able to bag knee-high grass that was in standing water.

Whatever you want to do! Happy weekend!

I give these away for free.

Do that what you want to do for this edger it's your call

I’d clean it up, fix it if it’s not too much of a hassle and if you don’t need it I’d sell it

They LASTED too long. A lot of the 92000 series engines even had a plastic carburetor back in the 70s, but they STILL lasted forever.

Worthless. They don't sell. Ask me how I know.

Clean it up, change the oil HD30 with 20% oil stabilizer mixed in. Also It could be over filled .

Clean, service and put it for sale. I'd buy it.

My favorite push lawnmower

Put it up for sale man. Looks to be in decent condition. Someone out there's looking for a deal on an edger. Clean it up and sell it.

At least 2 you made a decent profit on , to bad on the 3rd mower though

I have this same edger and LOVE it. No issues after 2 years. I drain the fuel and run until starved to winterize and no issues. Same as my weed eater with the same engine for the last 5 years. Love your videos. I have a TurfMaster 7.5 hp lawnmower thats always hard to start, even after a carb cleaning. Going to try the valve adjustment. Thanks!

Got this same issue. Any chance you post a in depth how to??

I bought one for my troybilt for $14.99 from amazonjust the other day

Hey man. How’s it goin? Everything all good?

Hey bro what's up? Have you tried the tap method?😂😂

As shop trying to make money then no. As an individual maybe. In the future it will be necessary because you won't be able to get new gas mowers probably. Especially not a Honda

I have a ryobi and the head wouldn't spin so I replaced.the shaft off my parts trimmer.

The spring will sproing

I just keep 4 in stock 😢

im replacing it for a metal recoil housing

What app do u use

What website do u use to find these machines

Why’s it got a husqvarna logo on it

I recently had to service the recoil for a $20 Honda find. The spring was so gummed up with a mix of dirt, (ill-advised) oil, and corrosion that I had to clean it with a degreaser and a scotchbrite pad, then hit it with some sandpaper before reinstalling it and replacing the rope...works great now and didnt cost a dime. BTW, the problem I thought you were going to mention is the easy-to-bumble gasket order...my mower's previous owner totally screwed that up before walking away from the fix and listing it for sale.

I have one these and outbof the blue, it wont start. Normally, it will start with 1 to 2 pulls reliably. Mine has always been a little peculiar. It has to warm up before I can use the throttle and it refuses to warm up during cool whether.

That's happened to mine twice now

I just had to do that to mine yesterday

Try penetrating oil instead of brake cleaner

Those are easy to take apart and clean . I would say the idle jet plugging and making them surge is the biggest problem and the second is when the home owner tries to fix it by monkeying around with the governor linkage and gets all of the carb gaskets wrong trying to fix it!

Replacing the carb is the thing to do

BIOIIING

Well they figure it's a Honda so they don't need to make it very good on the pull rope because it starts first pull

I liked the old Briggs that you wound the spring in the housing with a piece of wood and a Crescent wrench.

Thanks, but I need no help

Dont use brake cleaner. Its eats the plastic and the rope. Use a silicone based lubricant. You can pick up a can at dollar general for a couple bucks, or hit up Tractor Supply for some better stuff.

What don't you like about how they are marketed?

I run everything dry before long term storage. Sometimes I’ll use aviation fuel for the last use during fall leaf cleanup, that stuff has a shelf life of years and can be left in over winter.

What kind of lawnmower was the other one they are probably rough on all their lawnmowers

Did you figure out what was causing it to get locked?

Hello I have a Honda Mower HRR216. The self propelled doesn’t work, I adjusted the cable but nothing.